DescriptionThe RCF 6 machine is designed to run the standard three ball on rod rolling contact
WhatsApp : +86 13816217984
Email : info@qinsun-lab.com
The RCF 6 machine is designed to run the standard three ball on rod rolling contact fatigue test geometry, in which three balls, separated by a retainer, are loaded against a rotating rod specimen, by applying an axial force across two taper bearing cups, mounted above and below the three balls.
| Test Geometry: | Ball on rod |
| Rod Diameter: | 9.53 mm and 10 mm |
| Ball Diameter: | 12.7 mm |
| Motion: | Rotary |
| Contact Load: | 200 to 1200 N |
| Fatigue Cycles per Revolution: | 2.3828 with 9.53 mm diameter rod |
| 2.3654 with 10 mm diameter rod | |
| Speed: | 300 to 15.000 rpm |
| Motor: | 1.4 kW @ 15.000 rpm |
| Temperature: | Ambient to 80°C |
| Test Stations: | Up to 6 |
| Control: | PLC |
| Lubricant Service Module: | Included |
| Manually Controlled Parameters | |
| Load: | Pneumatic – actuators in parallel |
| Rotational Speed: | Each test station independently controlled |
| Temperature: | Each test station independently controlled |
| Vibration Level: | Each test station |
| Data Logged Parameters | |
| Load: | Pressure transducer – one per installation |
| Temperature: | Yes – each test station |
| Test Duration: | Yes – each test station |
| Services | |
| Electricity per Test Station: | 220/240V, single phase, 50 Hz, 4.5 kW |
| 110/120V, single phase, 60 Hz, 4.5 kW | |
| Clean, dry air: | 4 cfm at 8 bar (120 psi) |
Sorumluluktan vazgeçme: Yukarıdaki içerik yalnızca endüstri içindeki kişiler arasında referans ve iletişim amacıdır ve doğruluğunu veya eksiksizliğini garanti etmez. İlgili yasa ve düzenlemelere ve bu web sitesinin düzenlemelerine göre, ilgili ürünleri satın alan birimler veya bireyler geçerli nitelikler ve nitelik koşulları almalıdır.
Şirket Telefonu
+86-21-6420 0566
Çalışma saatleri
Pazartesi - Cuma
Cep telefonu:
13816217984
E-posta adresi:
info@qinsun-lab.com
