Pile density tester

Functional features:

1. Accurate transmission, good consistency: due to the use of gear driven synchronous belt transmission, the speed ratio is accurate, will not produce the general triangle belt speed loss phenomenon （triangle with 3% drop rate）， while the equipment installed digital timer, set the time after the automatic shutdown, to ensure the consistency of inspection or production requirements.

2. Long life, low maintenance cost: because the two gears do not have direct contact will not wear, the synchronization belt and gear contact adaptability is good, long life, maintenance only need to replace the synchronization belt, while the eccentric wheel group adopts the whole way, accurate and convenient installation again, the rotating part uses bearings （standard parts）， not easy to wear, low cost, easy to replace. The technical requirements and cost of maintenance are reduced.

3. Clean: Because this transmission mode does not require refueling, it reduces maintenance costs and protects the environment, which is very beneficial to the production environment.

Technical parameters:

Sieve diameter :200MM

Standard screen: p200 * 50 mm （1.4/0.71 3.15/1.25 5.6/1.6 6.3/1.8 11.2/2.5） a total of five

Number of swings :290+10 times/min

Number of strokes :156±10 times/min

Reciprocating times :25MM

Power :370W

Striking height :38±6MM

Voltage :380, 220V

Dimensions :500*400*700MM

Sieve weight :100 kg