AC220V 5A SATRA TM161 EN20344 Sole Flexing Tester

Instrument introduction

Install the sole test piece on the EN Flexing testing machine, so that the incision falls just above the center of the rotating shaft of the EN Flexing testing machine, and the EN Flexing testing machine drives the test piece to stretch (90±2)º on the shaft to bend, After a certain number of tests, the length of the incision of the test piece is measured, and the torsion resistance of the test sole is evaluated by the growth rate of the incision.

Reference standard

Comply with: GB/T20991. GB21148. SATRA TM161. EN20344. ISO-17707. EN344 standard.

Technical Specifications

1. Three outsole can be measured at the same time

2. Bending angle: (90±2)º

3. Speed: (5 to 150) r/min adjustable

4. Diameter of zigzag shaft: 30mm

5. Volume; (83x44x62) cm

6. Weight: about 115kg

7. Power: frequency conversion 400w

8. Power supply: AC220V, 5A